Oppo f1s a59

OPPO F1s A59 is a smartphone that runs on the Android 5.1 version system. The phone is powered by a 1.5 GHz Octa-Core MediaTek MT6750 processor. Its storage capacity includes 3 GB of RAM, 32 GB storage, and support for microSD cards up to 128 GB. The A59 F1s has a 13 MP rear camera and a 16 MP front camera. The phone also comes with a 3075 mAh battery, and the dimensions are 154.5 x 76 x 7.4 mm. The A59 F1s also has a 5.5-inch LCD display with a resolution of 720 x 1280 pixels and a pixel density of 267 ppi.

Replacing the OPPO F1s A59 battery

OPPO F1s A59 batteries tend to lose efficiency and need to be replaced after a while. To replace the A59 F1s battery, the user should first turn off the phone. After that, the user needs to remove the back cover by pulling it from the slit at the bottom. The user should then remove the sticker covering the screws on the back. The screws need to be removed, and the user should then take out the battery by lifting it from the top right corner. The user should then remove the connector from the battery by carefully lifting it from the connector socket. The old battery can be replaced with a new Batre BLP601 battery. The user should then connect the new battery to the connector socket. The phone's back cover should be placed back and securely fixed with the screws. Lastly, the user should press the power button to turn on the phone and check if the new battery is working properly.

Screen replacement for the OPPO F1s A59 smartphone

Screen replacement for the OPPO F1s A59 is necessary when the screen is cracked, shattered, or damaged. To replace the screen, the user needs to turn off the phone and remove the SIM card tray. The phone's back cover needs to be removed. Screws that hold the battery connector and the battery protection plate should be removed. The user should then disconnect the connector for the fingerprint sensor. After that, the user should disconnect the battery connector. The screen replacement for the A59 OPPO F1s continues by removing the screws of the metal shield that covers the motherboard connectors and removing the metal shield. The user should then disconnect the front camera connector, display connector, and touch panel connector. The user can now remove the damaged screen and replace it with a new one. The connectors should be connected in the reverse order that they were disconnected. The phone should be turned on to check if the new screen is functioning correctly.